JVC lt-32d50sj ユーザーズマニュアル
Additional preparation
65
LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH
Equipment which can output the
S-VIDEO signal (Y/C signal)
Connect the equipment to an EXT terminal
(but not the EXT-4 terminal).
You can choose between an S-VIDEO signal
(Y/C signal) and a regular video signal
(but not the EXT-4 terminal).
You can choose between an S-VIDEO signal
(Y/C signal) and a regular video signal
(composite signal). For details of how to
operate the equipment, see “S-IN (S-VIDEO
input)” on page 59.
operate the equipment, see “S-IN (S-VIDEO
input)” on page 59.
T-V LINK compatible VCR
Be sure to connect the T-V LINK compatible
VCR to the EXT-2 terminal. If not, the T-V
LINK function will not work properly.
LINK function will not work properly.
• When connecting a T-V LINK compatible
VCR to the EXT-2 terminal, be sure to
connect the decoder to the VCR. If not,
connect the decoder to the VCR. If not,
the T-V LINK function may not work
properly.
properly.
• When you connect the decoder to the
VCR, after you have stored TV channels
in the programme numbers (PR) list, set
in the programme numbers (PR) list, set
the DECODER (EXT-2) function for the
programme number (PR) to ON to
unscramble a scrambled TV channel. For
details, see “DECODER (EXT-2)” on
programme number (PR) to ON to
unscramble a scrambled TV channel. For
details, see “DECODER (EXT-2)” on
Connecting headphones
Connect the headphones with a stereo mini-
jack (3.5 mm diameter) to the headphone
jack socket.
jack (3.5 mm diameter) to the headphone
jack socket.
• No sound comes from the TV speakers
when the headphones are connected and
only one screen is displayed.
Video or sound signal output from
the EXT-2 terminal
You can change over the output of the video/
sound signal from the EXT-2 terminal. This
is useful when you want to dub the video/
sound from another device onto the VCR
is useful when you want to dub the video/
sound from another device onto the VCR
connected to the EXT-2 terminal. For details
on how to do this, see “DUBBING” on
page 60.
on how to do this, see “DUBBING” on
page 60.
• The signals from EXT-4 and PC IN
terminal cannot be output from EXT-2.
TV output from the EXT-1 terminal
The video/sound signal of a Analogue
terrestrial broadcasting channel you are
viewing is always output from the EXT-1
terminal.
viewing is always output from the EXT-1
terminal.
• Changing over a programme number (PR)
also changes over the TV output from the
EXT-1 terminal.
• The video/sound signal from an EXT
terminal cannot be output.
• Teletext programmes cannot be output.
Connection when recording to
VCR
• When recording an Analogue terrestrial
broadcasting, connect to either terminal
EXT-1 or EXT-2. If you connect to the
EXT-2 terminal, make sure the
EXT-1 or EXT-2. If you connect to the
EXT-2 terminal, make sure the
“DUBBING” setting (see page 60) is set
to “TV”.
to “TV”.
• Choose the EXT-2 terminal to connect to
a T-V LINK compatible VCR.
When recording an Analogue terrestrial
broadcasting, set the “DUBBING” setting
When recording an Analogue terrestrial
broadcasting, set the “DUBBING” setting
(see page 60) to “TV”.
When recording a Digital terrestrial
broadcasting (DVB-T), set the
When recording a Digital terrestrial
broadcasting (DVB-T), set the
LT-32&26D50BJSJ_Eng.book Page 65 Thursday, October 7, 2004 4:42 PM