JVC lt-20da6ssp ユーザーズマニュアル

- 37 -

Select the required subcode page number

by pressing four digit buttons (e.g. 0001).

If the selected subcode page is not displayed

in a short time, press

button. TV

programme will be displayed on the screen.

Teletext page number will be displayed on

the upper left corner of the screen when the

selected page is found.

Press

button to display the selected

Teletext page.

To exit Teletext

Press

button. The screen will switch to

TV mode.

Fastext and Toptext

Your TV supports the 7 page Teletext system.

When the page number of any of the 7 pages

in memory is entered, the system will not

search for the requested page; instead it will

display the page automatically.
Press

button to move the Teletext

screen forward one page at a time.

Press

button to move the Teletext

screen backward one page at a time.

For Fastext and Toptext
The subject-heading for the information may

have a particular colour.
Press an appropriate RED, GREEN, YELLOW

or BLUE button in order to reach the relevant

page quickly.

For TOPTEXT
If Toptext transmission is present, colour

coded buttons will appear in status row.
If Toptext transmission is not present, status

row will not appear.
In Toptext mode the

com-

mands will request the next or previous page

respectively. If Toptext transmission is not avail-

able, in case of operation of these commands,

wraparound occurs. For example page 100

appears to be one greater than page 199.

Peripheral Equipment

Connections

There is a wide range of audio and video equip-

ment that can be connected to your TV.
Connection diagrams at the end of this section

show you where the different equipment should

be connected at the back side of the TV.

Via the Euroconnector

Your TV set has 2 Euroconnector sockets. If

you want to connect peripherals (e.g. video,

decoder, etc.) which have Euroconnectors, to

your TV, use EXT-1 or EXT-2 input.
If an external device is connected via Euro-

connector sockets TV is switched to AV mode

automatically. In this case if both sockets are

connected, SCART1 has the precedence.

T-V LINK compatible VCR

Be sure to connect the T-V LINK compatible

VCR to the EXT.2 terminal. If not, the T-V LINK

function will not work properly.
When connecting a T-V LINK compatible

VCR to the EXT.2 terminal, be sure to con-

nect the decoder to the VCR. If not, the T-V

LINK function may not work properly. And

then set the Decoder (EXT-2) function for the

channel to ON to unscramble a scrambled

channel.

RGB mode

If an equipment can output the RGB signals,

connect it to the EXT-1 or EXT-2 terminal.

EXT-2 S Mode

If the equipment connected to your TV set sup-

ports S-Video (Y/C) output from Euroconnec-

tor, you can have a better picture quality by

selecting EXT-2 S mode and connecting your

equipment to the EXT.2 (EXT-2 S) terminal of

TV. See your equipments booklet to check if

your equipment has such feature.

Via the RCA jacks

If you have an equipment (such as a Cam-

corder) which has the RCA jacks, connect it to

the EXT-4 terminal with the video and audio

cables.

01-ENG-20710W-17MB16P-C1897S UK-(LT-20DA6SSP)-(TVAVOK)-IDTV-10042117-5008XXXX.p65

15.06.2006, 17:39