JVC 0609SKMLGEEGL ユーザーズマニュアル

No power.

The power is on, but
the player does not
work.

No picture.

No sound.

The player does not
start playback.

BD-Live feature does
not work.

The Remote Control
does not work properly.

The system does not
function at all.

• The power cord is disconnected.

• No disc is inserted.

• The TV is not set to receive video

signal output.

• The video cable is not connected

securely.

• The selected resolution is not capa-

ble with your TV.

• The equipment connected with the

audio cable is not set to receive disc
signal output.

• The power of the equipment connect-

ed with the audio cable is turned off.

• The [AUDIO] options are set to the

wrong position.

• The player is in reverse play, fast for-

ward, slow motion or pause mode.

• The disc is upside down.

• An unplayable disc is inserted.

• The rating level is set.

• The disc was recorded on another

unit and was not finalized.

• A USB Flash Drive is not connected.

• The connected USB Flash Drive

does not have enough space.

• Internet connection is not established.

• Your broadband speed is not fast

enough to use the BD-Live features.

• The [BD-LIVE connection] option in

the [Setup] menu is set to
[Prohibited].

• The Remote Control is not pointed at

the remote sensor on the player.

• The Remote Control is too far from

the player.

• A state is unstable.

• Plug the power cord into the wall out-

let securely.

• Insert a disc. 

• Select the appropriate video input

mode on the TV.

• Connect the video cable securely.

• Select another resolution using 

RESOLUTION button.

• Select the correct input mode of the

audio receiver so you can listen to
the sound from the player.

• Turn on the equipment connected

with the audio cable.

• Set the [AUDIO] options to the cor-

rect position (see page 20).

• Return to the normal playback.

• Insert the disc with the playback side

down.

• Insert a playable disc. (Check the

disc type and regional code.)

• Change the rating level.

• Finalize the disc on that unit.

• Connect a FAT16 or FAT32 formatted

USB Flash Drive to the USB port
(see page 10).

• Secure at least 1GB free space in

the USB Flash Drive for using 
BD-Live features. 

• Ensure that the unit is correctly con-

nected to the local area network and
can access the internet (see page 16).

• Contact your Internet Service

Provider (ISP) and increase the
broadband speed is recommended.

• Set the [BD-LIVE connection] option

to [Permitted].

• Point the Remote Control at the

remote sensor of the player.

• Operate the Remote Control closer to

the player.

• Unplug the power cord and then plug

the power cord again after more than
five seconds.