JVC UX-G60 ユーザーズマニュアル

ページ / 48
 
40
 
Setup Menu Operations 
 
(see pages 35 and 36)
 
General:
 
• If the upper and lower parts of the menu are cut off, adjust 
the picture size control of the TV.
 
LANGUAGE menu:
 
• When the language you have selected for MENU 
LANGUAGE, AUDIO LANGUAGE, or SUBTITLE is 
not recorded on a disc, the original language is used as the 
initial language.
 
PICTURE menu—MONITOR TYPE:
 
• Even if “4:3 PS/4:3 MULTI PS” is selected, the screen size 
may become 4:3 letter box while playing a disc. This 
depends on how the discs are recorded.
• When you select “16:9/16:9 MULTI” for a picture whose 
aspect ratio is 4:3, the picture slightly changes due to the 
process for converting the picture width.
 
OTHERS menu—ON SCREEN GUIDE:
 
• The setup menu and on-screen bar will be displayed (and 
recorded) even though this function is set to “OFF.”
Subtitles and the information for zoom-in always appear on 
the display regardless of this setting.
 
Maintenance
 
To get the best performance of the System, keep your discs, 
tapes and mechanism clean.
 
Handling discs
 
• Remove the disc from its case by holding it at the edge 
while pressing the center hole lightly.
• Do not touch the shiny surface of the disc, or bend the disc.
• Put the disc back in its case after use to prevent warping.
• Be careful not to scratch the surface of the disc when 
placing it back in its case.
• Avoid exposure to direct sunlight, extreme temperature, 
and moisture.
 
To clean the disc:
 
Wipe the disc with a soft cloth in a straight line from center 
to edge.
 
Handling cassette tapes
 
• If the tape is loose in its cassette, take up the slack by inserting 
a pencil in one of the reels and rotate it.
– If the tape is loose, it may get stretched, cut, or caught in the 
cassette.
• Be careful not to touch the tape surface.
• Avoid the following places to store the tape—in dusty places, 
in direct sunlight or heat, in moist areas, on a TV or speaker, 
or near a magnet.
 
To keep the best recording and playback sound quality:
 
• Use a cotton swab moistened with alcohol to clean the heads, 
capstans, and pinch rollers.
• Use a head demagnetizer (available at electronics and audio 
shops) to demagnetize the heads (when the System turned off).
 
Cleaning the System
 
• Stains should be wiped off with a soft cloth. If the System 
is heavily stained, wipe it with a cloth soaked in water-
diluted neutral detergent and wrung well, then wipe clean 
with a dry cloth.
• Since the System may deteriorate in quality, become 
damaged or get its paint peeled off, be careful about the 
following:
– DO NOT wipe it with a hard cloth.
– DO NOT wipe it forcefully.
– DO NOT wipe it with thinner or benzine.
– DO NOT apply any volatile substance such as 
insecticides to it.
– DO NOT allow any rubber or plastic to remain in contact 
for a long time.
 
To remove the speaker grilles (for UX-G60 only):
Holes
Speaker 
grille
Projection
UX-G60[U]_2.book Page 40 Tuesday, February 7, 2006 5:16 PM