JVC xm-px50wt ユーザーズマニュアル
XM-PX50WT
1-5
Shift the door lever to open the door.
Remove the four screws A and detach the MD
door
assembly from the main body.
1.
2.
Disassembly method
Removing the MD door assembly
(See Fig.1 and 2)
Prior to performing the following procedure, remove
the MD door assembly.
the MD door assembly.
Turn the Holder assembly as shown in Fig.3.
Pull the side arm (L) marked a and
remove outward.
Open the Holder assembly as
shown in Fig.4.
Move the “U-shaped” notch marked b in the direction
of the arrow and release it from the shaft.
of the arrow and release it from the shaft.
Move the part c inward and pull out the Holder
assembly from the shaft.
assembly from the shaft.
1.
2.
3.
4.
Removing the holder assembly
(See Fig.3 and 4)
When reassembling, first reattach the
part c to the shaft of the Chassis
assembly. And next, fit the “U-shaped”
notch to the shaft.
part c to the shaft of the Chassis
assembly. And next, fit the “U-shaped”
notch to the shaft.
ATTENTION:
MD door assembly
Door lever
A
A
Fig.1
Fig.2
Fig.3
Part a
Part b
”U-shaped” notch
Part c Shaft
Side arm (L)
MD door assembly
Door lever
Holder
assembly
Holder
assembly
Holder
assembly
Part c
Holder
assembly
Fig.4