JVC SP-THD51F ユーザーズマニュアル
7
Make sure the antenna conductors do not touch any
other terminals, connecting cords or power cords.
Keep the AM loop antenna cable wrapped around
the AM loop antenna frame, otherwise the
effectiveness and sensitivity of the AM loop antenna
may be reduced.
other terminals, connecting cords or power cords.
Keep the AM loop antenna cable wrapped around
the AM loop antenna frame, otherwise the
effectiveness and sensitivity of the AM loop antenna
may be reduced.
Connect the TV to the appropriate video out jacks to view
the playback picture.
the playback picture.
Make the following settings after connecting the TV:
– Scanning mode (
– Scanning mode (
12)
– Monitor out (
13)
– MONITOR TYPE (
23)
Connection using the HDMI terminal
You can make the following settings for the TV when
the HDMI connection is used:
– HDMI DVI COLOR (
the HDMI connection is used:
– HDMI DVI COLOR (
23)
– HDMI OUT (
23)
– HDMI AUDIO OUT (
24)
– DOWN MIX (
24)*
Use a certified HDMI cable, which has the HDMI
logo.
You can use a monitor with a DVI terminal by
connecting with a DVI-HDMI conversion cable.
When you play HDCP (High-Bandwidth Digital
Content Protection) source, allow a few seconds for
the sound and picture to be transmitted to the
speakers and TV while the confirmation process is
completed.
On some TVs, no sound may come out during
playback of sources such as DVD Audio even when
the HDMI AUDIO OUT setting is “ON” (
logo.
You can use a monitor with a DVI terminal by
connecting with a DVI-HDMI conversion cable.
When you play HDCP (High-Bandwidth Digital
Content Protection) source, allow a few seconds for
the sound and picture to be transmitted to the
speakers and TV while the confirmation process is
completed.
On some TVs, no sound may come out during
playback of sources such as DVD Audio even when
the HDMI AUDIO OUT setting is “ON” (
24).
* This setting is available only when the speaker position
mode is set to “S.SPK F” (
11).
Connecting the AM (MW) and FM
antennas
antennas
For better FM reception
Extend it horizontally.
FM antenna
(supplied)
(supplied)
AM (MW) loop
antenna (supplied)
Turn it until the best
reception is obtained.
reception is obtained.
FM outdoor antenna
(not supplied)
Standard type (75
Ω
coaxial) connector (IEC
or DIN 45325)
or DIN 45325)
FM outdoor antenna cord
(not supplied)
Connecting a TV
TV
From HDMI input
terminal
terminal
HDMI cable (not supplied)
Getting started
TH-D51[B]EN.book Page 7 Friday, August 3, 2007 10:26 AM