Toshiba BDX4300KU ユーザーズマニュアル

17

5.375 x 8.375 ver 3.1

Your Blu-ray Disc™/DVD player can be connected to your home network:

❖

By using a wired network. This provides the best performance, because the attached device 
and player are connect directly to the network and are not subject to radio frequency 
interference.

❖

By connecting through a wireless LAN adaptor and a wireless access point or router (for 
BDX4300KU model).

❖

By connecting through the built-in wireless device and a wireless access point or router (for 
BDX5300KU model).

Connect one end of an Ethernet cable (CAT5 or better with RJ45 connector) to the Ethernet jack 
on the front of your player, and the other end to a wired hub or broadband router.

Do not connect a modular phone cable to the Ethernet jack.
When plugging or unplugging the cable, hold the connector on the end of the cable.
When unplugging, do not pull on the cable. Press down the lock tab, and then pull the 
connector out of the jack.

Because there are various connection configurations, follow the instructions from your 

telecommunication carrier or Internet service provider.

Your Blu-ray Disc™/DVD player can also be connected to a network via Wireless access point.

USB Wi-Fi

®

 adapter is not included and is required for a wireless connection.

This unit is compatible with TOSHIBA's USB Wi-Fi

®

 adapter only. Model name: 

WLM-12NB1.

A wireless AP/IP router is required to create a wireless network connection.
1 Connect the wireless LAN adapter to the USB port on the front panel of the Blu-ray 

Disc™/DVD player, and set the wireless network options.

2 After the Wi-Fi

®

 device is inserted into the USB port, press the (

) arrow buttons to 

select Network from the Settings menu, and press the OK button to enter. 

For detailed information, refer to the device’s User’s Guide for WLM-12NB1.

LAN

WAN

LAN

1

2

3

4

5

Internet

LAN cable

LANcable

Hub or broadband router

Networking equipment

(modem, etc.)