Toshiba hd-ep30kb ユーザーズマニュアル

See 

 page 19.

To activate or deactivate the operational status display on the TV screen.

Activates the operational status display (e.g.,  ) on the TV screen.

Deactivates the operational status display (e.g.,  ) on the TV screen.

To turn on or off the confi rmation beeper announcing when each remote command is received.

Turns on the beep sound.

Turns off the beep sound.

To turn on or off the features offered with CEC (Consumer Electronics Control) when an HDMI device is connected to this player.
Use of HDMI Control which is a feature based on HDMI-CEC requires an HDMI-CEC compatible display device.

Select “On” to control this player using the remote control of your TV.
To disable this function, select “Off”.

(Only when “Enable HDMI control” is set to “On”) 
Select “On” to turn the connected TV on if it is off and set its input to the player automatically to display the 
player’s picture, by pressing one of   (PLAY), MENU, RESUME PLAY, TOP MENU buttons.
To disable this function, select “Off”.

(Only when “Enable HDMI control” is set to “On”) 
Select “On” to turn off both the player and the connected TV from the TV’s remote control.
To disable this function, select “Off”.

When complete, select “OK” then press OK button.

•  Depending on the specifi cations of your TV, this function does not work even when your TV is HDMI-compatible.
•  All the above features may not always work on all compatible TVs.

To reset all the settings listed on 

 page 30, 31 to factory set default.

Press   /   buttons to select “Yes” then press OK button.

If you have a broadband internet service, you may obtain fi rmware update over the internet using the LAN 
port on the back of your player.
•   BEFORE BEGINNING THE FIRMWARE UPDATE PROCESS, BE SURE TO REMOVE ANY DISCS 

FROM YOUR PLAYER.
Please confi gure the LAN port (

 page 17). You may need to turn on DHCP and DNS (

 page 22).

•   Press SETUP and select “General” > “Maintenance”. Follow the instructions on the screen.
•   If a fi rmware update is available for your player, the player will download it. Once the fi rmware update 

dowload process has fi nished, the player’s power will automatically switch off. You must wait until this 
process has fi nished.

•   DO NOT UNPLUG, TURN OFF, OR USE ANY OTHER FEATURE OF YOUR PLAYER DURING THE 

FIRMWARE UPDATE PROCESS. Doing so will cause the writing of the fi rmware update to the player 
to be halted and the player may no longer operate properly. If the player stops working, please contact 
Toshiba customer service for your country or http://www.highdefi nitiondvd.eu/.

•   If no fi mware update is available, the player will quickly exit the fi rmware update process.

Persistent Storage To open the menu to control player’s memory allocated for content. (Not available while a disc is loaded.)

The menu selections will vary depending on the content. Operate following the instructions displayed on 
your screen.

To select a layer to play, HD DVD or DVD of an HD DVD Twin Format Disc. (Not available if a disc is loaded.)

Only the HD DVD layer is played.

Only the DVD layer is played.

•  For combination discs, select the desired version by disc side (see label for information).

HD-EP30KE_Eng.indd   35

HD-EP30KE_Eng.indd   35

07.9.3   2:02:05 PM

07.9.3   2:02:05 PM