Toshiba IP5000 ユーザーズマニュアル

1. To place a call on Hold, press the 

button.

2. To return to the held call, press the held line’s button.

If you do not return to the held call, it rings back to your phone. 
If you are busy on another call, you hear two tone bursts. If the 
held party hangs up, the call is released.

 To place a call on Exclusive Hold



While on a call, press 

 twice. This places the call on 

Exclusive Hold; no one else will be able to access that line.

 To place a call on Automatic Hold



While on a call, press another extension button to receive/
originate a new call. You can switch between calls without 
having to press 

.

Make sure this feature is programmed on your system; if not, 
existing calls will drop.

Mute on the IP5000-series telephones mutes not only the microphone 
but also the handset microphone as well. The MIC button on the 
telephones toggles between Mic and Mute. When Mic button is lit, 
handsfree communication is supported, when 

 is pressed and light 

is off, Mute is enabled.



During a handsfree conversation, press the Mic key, the red 
indicator will turn off; the microphone and handset are 
muted.



Press the Mic key again to resume hands free communication, 
the red indicator will turn on.

The procedures below are for IP5000-series telephones 
connected to Strata CIX systems.
For IPedge refer to the IPedge Telephone, Messaging 
and Call Manager User Guide.

 To store a number on the One Touch button

1. Dial 

. 

2. Press a 

 button.

3. Enter the number to be stored.

4. Press the 

 button again.

One Touch buttons must be programmed on a 

Programmable Feature Button.