Toshiba sd-3900 ユーザーズマニュアル

z

Depending on your TV and other equipment you wish
to connect, there are various ways you could connect
the player. Use only one of the connections
described below.

z

Please refer to the manuals of your TV, VCR, Stereo
System or other devices as necessary to make the
best connections.

z

For better sound reproduction, connect the player’s
AUDIO OUT jacks to the audio in jacks of your 
amplifier, receiver, stereo or audio/video equipment.
See “Connecting to Optional Equipment” on page 11.

– Make sure the DVD Player is connected directly to the

TV. Tune  the TV to the correct video input channel.

– Do not connect the DVD Player’s AUDIO OUT jack to

the phono in jack (record deck) of your audio system.

– Do not connect your DVD Player via your VCR. The

DVD image could be distorted by the copy protection
system.

z

Make one of the following connections, depending on
the capabilities of your existing equipment.

1

Connect the VIDEO OUT jack on the DVD Player to
the video in jack on the TV using the video cable (V).

2

Connect the Left and Right AUDIO OUT jacks of
the DVD Player to the audio left/right in jacks on the
TV (A) using the audio cables.

1

Connect the S-VIDEO OUT jack on the DVD Player
to the S-Video in jack on the TV using the S-Video
cable (S).

2

Connect the Left and Right AUDIO OUT jacks of
the DVD Player to the audio left/right in jacks on the
TV (A) using the audio cables.

1

Connect the COMPONENT VIDEO OUT/
PROGRESSIVE SCAN jacks on the DVD Player to
the corresponding in jacks on the TV using the 
Y Pb Pr cable (C).

2

Connect the Left and Right AUDIO OUT jacks of
the DVD Player to the audio left/right in jacks on the
TV (A) using the audio cables.

z

If your television is a high-definition or “digital ready”
television, you may take advantage of the DVD
Player’s progressive scan output for the highest
video resolution possible. 

z

If your TV does not accept the Progressive Scan for-
mat, the picture will appear scrambled if you try
Progressive Scan on the DVD Player.

1

Connect the COMPONENT VIDEO OUT/ 
PROGRESSIVE SCAN jacks on the DVD Player to
the corresponding in jacks on the TV using the 
Y Pb Pr cable (C).

2

Connect the Left and Right AUDIO OUT jacks of
the DVD Player to the audio left/right in jacks on the
TV (A) using the audio cables.

– Set the Progressive to “On” on the setup menu for

progressive signal, see page 13.

– Progressive scan does not work with the analog video

connections (yellow VIDEO OUT jack) or S-VIDEO
connection.

If the TV has an S-video input, connect the DVD player
with the S-video cable. When using an S-video cable,
do not connect the yellow video cable.