Toshiba sd-p1500 ユーザーズマニュアル

Check the following guide for the possible cause of a problem before contacting service.

No power.

The player turned off by itself.

No picture.

No sound.

The playback picture has
occasional distortion.

Brightness is unstable or
noises are present in the
playback pictures.

The player does not start
playback.

Playback does not follow the
course of the disc’s program.

Buttons do not work.

The remote control does not
work properly.

• The AC adapter or power plug is

disconnected.

• Dead batteries.

• The automatic power off function turned

the unit off.

• The connected TV is not set to receive

DVD signal output.

• The audio/video cable is not connected

securely.

• The “LCD Picture” is set to “Fine”.

• The equipment connected via the audio/

video cable is not set to receive DVD
signal output.

• The audio/video cable is not connected

securely.

• The audio receiver or TV is turned off.

• The setting of output sound format is

incorrect.

• The disc is dirty.

• Player is in fast forward or fast reverse

mode.

• The main unit was moved or given a

shock.

• The disc is not set firmly.

• The effect of copy protection.

• No disc is inserted.

• An unplayable disc is inserted.

• The disc is inserted upside down.

• The disc is not inserted securely.

• The disc is dirty.

• The parental lock function is set.

• It is in the repeat playback mode, memory

playback, etc.

• Power supply fluctuations or other

abnormalities such as static electricity may
interrupt correct operation.

• The remote control is not pointed at the

remote sensor of the player.

• The remote control is too far from the

player.

• The batteries in the remote control are

exhausted.

• Connect the AC adapter or power plug

securely.

• Re-charge the battery.

• Press the PLAY button.

• Select the appropriate video input mode

on the TV so the picture from the player
appears on the TV screen.

• Connect the audio/video cable securely

into the appropriate jacks.

• Close up the LCD or press the LCD

MODE button to turn the LCD monitor off.

• Select the correct input mode of the

audio receiver so you can listen to the
sound from the player.

• Connect the audio/video cable securely

into the appropriate jacks.

• Turn on the equipment connected with

the audio/video cable.

• Select the proper audio setting.

• Eject the disc and clean it.

• Sometimes a small amount of picture

distortion may appear. This is not a
malfunction.

• Vibrating or shaking the unit during

playback may produce distortion. This is
not a malfunction. If not restored to usual
status, stop the playback and start again.

• Remove the disc and set it again.

• Connect the player directly to the TV.

Avoid connecting the player to a VCR or
TV/VCR combination.

• Insert a disc.

• Insert a playable disc. (Check the disc

type and color system.)

• Insert the disc with the playback side

down.

• Insert the disc securely in the disc holder.

• Clean the disc.

• Cancel the parental lock function or

change the parental lock level.

• These operations may prevent a proper

progression of the contents.

• Turn the power on or off with the

POWER button. Or disconnect the power
plug and insert it into the wall outlet
again.

• Point the remote control at the remote

sensor of the player.

• Operate the remote control within about

7 m.

• Replace the batteries with new ones.