Toshiba sd-w1111 ユーザーズマニュアル

OD-A017-02

+5V ± 5%, peak current 3A (Max. 2 sec., at spindle motor ON/OFF)

Note: Power supply current is usually 1.4A. But at a spin-up time the current increase to 3.0A. If the

power supply  cable that is long and thin, power supply voltage is drop and out of the

operational condition of this drive. Please use a short and thick power supply cable.

Note: The voltage drop with the power supply cable is approximately as follows.

Wire

Resistance (

Ω

/km)

Voltage drop (V)* at 1m wire length and 3A current

AWG22 (Twist wire)

57.4

0.344

AWG18 (Twist wire)

23.7

0.142

AWG22 (Single wire)

56.3

0.338

AWG18 (Single wire)

22.2

0.133

* The drop voltage in the both of the ground line and the power supply line

* This value changes according to the electric wire maker and the use temperature.

Average

Less than  6.7W

Stand-by period:

Less than  6.0W

Seek period:

Less than  11.0W

Sleep period:

Less than  1.0W

Less than 100 mVp-p (includes spike noise)

Refer to the drawing attached. (3. External views and dimensions)

      1.14kg (Net ,include front bezel)

Auto-loading tray system (Bare disc, cartridge disc)

Tray load/unload mechanism

1)  Load/Unload operation by the load/unload switch
2)  Load operation by pressing the tray.
3)  Load/Unload operation by the command.
4)  Emergency eject function

To protect the optical head while transporting the drive, the optical head auto-lock function is

provided.