Toshiba sd-w1111 ユーザーズマニュアル

ページ / 34
OD-A017-02
 TOSHIBA DVD-RAM SD-W1111
‘99/06/26 
Version
 1.0
Page 6
Product Specification
1. Scope
The specification is applied to DVD-RAM drive SD-W1111.
2. Features
(1) 2.6 GBytes capacity on one side of a 120 mm disc
  Using 650  nm short-wavelength laser, 0.74 
µ
m single spiral land
 
and groove
 
tracking and Z-CLV
system, realizes the memory of 2.6 GBytes (decimal) on one side of a 120 mm disc.
 
(2) High data recording rate by over-writing system
  Phase change recording technology enables to write data directory into the media without waiting for
pre-erasing (one-path direct over-writing system).
 
(3) Playback interchangeability for CD-ROM and DVD-ROM discs
  Playback a disc either for CD-ROM, CD audio or DVD-ROM.
 
(4) High-speed data transfer rate
  Possible to record and playback MPEG2 compressed motion picture (MP@ML) in a real time.
  Owing to the read/write cache, improves the data throughput marvelously.
(5) Low power consumption of 6.7W (typ.) using +5V single power supply
  Owing to the low power consumption design to operate using +5V single power supply, no exclusive
fan is required.
 
(6) Dust prevention structure
  Original sealing structure provides dust prevention features.
 
(7) Easy contact and operation
  Employs the SCSI interface that is easy to connect with various platform .
  Possible to install vertically as well as horizontally.
 
(8) High reliability
  MTBF 100,000H (under specified conditions)
  Powerful error correction ability by employing the erasure correction system using the ECC block
which is same as the DVD-ROM system.