packardbell easynote v サービスマニュアル
13
Note: Please make sure to release and tighten the screws for the heatsink
in the order designated in the image. This helps even out the pressure.
in the order designated in the image. This helps even out the pressure.
Note: First release all screws in the indicated order halfway. Remove the
screws completely in the second pass.
screws completely in the second pass.
Note: For the EasyNote V5 and V7 series, the CPU socket is identical to
earlier Intel Pentium M or Celeron M designs. However, it is not pin
compatible. It is not possible to run Intel Pentium M or Celeron M CPUs in
these notebooks.
earlier Intel Pentium M or Celeron M designs. However, it is not pin
compatible. It is not possible to run Intel Pentium M or Celeron M CPUs in
these notebooks.
Wireless LAN Card
1. Remove the battery as described in chapter Battery.
2. Remove the CPU cover as described in CPU.
3. Remove the 2 screws that secure the Wireless LAN card (mini-PCI
2. Remove the CPU cover as described in CPU.
3. Remove the 2 screws that secure the Wireless LAN card (mini-PCI
Express).
4. Disconnect the WLAN antenna.
5. Lift out the card.
Note: There can be a second wire looking identical to the WLAN antenna.
This is NOT a secondary WLAN antenna, but the connection cable for the
optional TV-card.
5. Lift out the card.
Note: There can be a second wire looking identical to the WLAN antenna.
This is NOT a secondary WLAN antenna, but the connection cable for the
optional TV-card.
Note: Please make sure to connect the WLAN antenna to the ‘
main’
connector.