BMW serie 3 sport wagon 2002 ユーザーズマニュアル
98
n
Cargo area
To remove cargo cover and
partition net
partition net
1. Press the buttons on the sides
(arrow 1)
2. Extract the case by pulling to the rear
(arrow 2).
Installation
Simply slide the case forward in the two
side holders until it engages.
side holders until it engages.
Storing with backrests folded
forward
forward
Supports for the case are also provided
on the rear sides of the backrests
(arrow 1).
on the rear sides of the backrests
(arrow 1).
Slide the case into the supports as
shown in the illustration, continuing
until the detent engages (arrow 2).
Ensure that the cargo cover is toward
the front of the vehicle, with the parti-
tion net's loop on the top.
shown in the illustration, continuing
until the detent engages (arrow 2).
Ensure that the cargo cover is toward
the front of the vehicle, with the parti-
tion net's loop on the top.
You can pull the partition net out and
insert it in the holders above it in the
upper roof area.
insert it in the holders above it in the
upper roof area.
To ensure that the case centers
correctly, remember to insert it
correctly, remember to insert it
from the right side, always continuing
until the detents snap into place. Failure
to observe the prescribed insertion
procedure could also result in damage
to the door's upholstery.
until the detents snap into place. Failure
to observe the prescribed insertion
procedure could also result in damage
to the door's upholstery.
<
Online Edition for Part No. 01 41 0 156 156 - © 09/01 BMW AG