kymco mo kxr 50 サービスマニュアル

REMOVAL
Remove the drive sprocket. (!6-2)

Remove the left crankcase cover. (!9-2)

Remove the clutch/driven pulley. (!9-10)

Drain the transmission gear oil into a clean

container.

Remove the transmission case cover attaching

bolts.

Remove the transmission case cover.

Remove the gasket and dowel pins.

Inspect the bearings for allow play in the
transmission case cover or the bearings turn
roughly.

If any defects are found, replace the bearing

with a new one.
Inspect the final shaft bearing oil seal for wear

or damage.

Remove the final gear and countershaft.

Inspect the bearings for allow play in the

transmission case cover or the bearing turns

roughly.
If any defects are found, replace the bearing

with a new one.

Bearings

Transmission  Cover

Bolts

Transmission Case Cover

Final Gear

Oil Seal

Countershaft

Bearings

Do not remove the transmission case

cover except for necessary part

replacement. When replacing the drive

shaft, also replace the bearing and oil

seal.

＊