BMW serie 3 sedan 2001 ユーザーズマニュアル
22
n
Indicator and warning lamps
Yellow: check as soon as possible
Antilock Brake System (ABS)
●
ABS has been deactivated in
response to system malfunction.
response to system malfunction.
Conventional braking efficiency is avail-
able without limitations. Please have
the system inspected by your BMW
center.
For additional information, refer to
page
able without limitations. Please have
the system inspected by your BMW
center.
For additional information, refer to
page
.
ABS warning lamp for Canadian
models.
models.
Engine oil level
Comes on while driving: the oil
level is at the absolute
Comes on while driving: the oil
level is at the absolute
minimum; therefore, add engine oil as
soon as possible. Do not drive more
than 30 miles (50 km) until you do.
For additional information, refer to
page
soon as possible. Do not drive more
than 30 miles (50 km) until you do.
For additional information, refer to
page
.
Engine oil level
Comes on after the engine has
been shut off: Add more engine
Comes on after the engine has
been shut off: Add more engine
.
Brake pads
●
Have the brake pads checked.
For additional information, refer
For additional information, refer
.
Tire Pressure Control (RDC)
●
.
Automatic Stability Control plus
Traction (ASC+T)/Dynamic
Stability Control (DSC)
Traction (ASC+T)/Dynamic
Stability Control (DSC)
●
Indicator lamp flashes:
The system is active and governs drive
force and braking force.
The indicator lamp stays lit:
ASC+T has been switched off via the
button, or it is defective, or, the DSC
has been turned off, ADB is in ready
mode.
Please consult the nearest BMW center
in the event of a system malfunction.
For additional information, refer to
ASC+T beginning on page
The system is active and governs drive
force and braking force.
The indicator lamp stays lit:
ASC+T has been switched off via the
button, or it is defective, or, the DSC
has been turned off, ADB is in ready
mode.
Please consult the nearest BMW center
in the event of a system malfunction.
For additional information, refer to
ASC+T beginning on page
BMW 325xi, 330xi:
The DSC has either been turned off or
is defective. ADB-X is in ready mode. If
the warning lamp does not go out after
pressing the DSC button repeatedly,
then both the DSC
The DSC has either been turned off or
is defective. ADB-X is in ready mode. If
the warning lamp does not go out after
pressing the DSC button repeatedly,
then both the DSC
and ADB-X are
Automatic Stability Control plus
Traction (ASC+T)/Dynamic
Stability Control (DSC) and
brake warning lamp
Traction (ASC+T)/Dynamic
Stability Control (DSC) and
brake warning lamp
●
The indicator lamps remain on:
The DSC and ADB/DBC have
The DSC and ADB/DBC have
been switched off by means of the
button or are defective.
Please consult the nearest BMW
center.
For additional information, refer to
page
button or are defective.
Please consult the nearest BMW
center.
For additional information, refer to
page
.
BMW 325xi, 330xi:
DSC and ADB-X are defective. ADB-X
cannot be switched off.
Please consult the nearest BMW
center.
For additional information, refer to
page
DSC and ADB-X are defective. ADB-X
cannot be switched off.
Please consult the nearest BMW
center.
For additional information, refer to
page
.
Indicator and warning lamps
DSC and ADB/ADB-X/DBC for
Canadian models.
DSC and ADB/ADB-X/DBC for
Canadian models.
Add washer fluid
The washer fluid is too low, refill
at the earliest opportunity.
The washer fluid is too low, refill
at the earliest opportunity.
For additional information, refer to
page
page
Online Edition for Part No. 01 41 0 155 476 - © 09/00 BMW AG