kymco mo kxr 50 サービスマニュアル

REMOVAL
Remove fuel tank. (Refer to the chapter 5)
Disconnect the oil recycle tube at the

cylinder head cover.

Remove the four bolts at the cylinder head

cover, then remove the cylinder head cover.

INSTALLATION
Install a new cylinder head cover O-ring and

install the cylinder head cover.

Install and tighten the cylinder head cover

bolts.
Torque: 0.8_ 1.2kgf-m

REMOVAL
Remove the cylinder head cover. (Refer to

the “CYLINDER HEAD COVER

REMOVAL”)

Remove the cam chain tensioner cap, bolt

and the O-ring.

Turn the cam chain tensioner screw

clockwise to tighten it.

Turn the cooling fan clockwise so that the

“T” mark on the flywheel aligns with the

index mark on the crankcase to bring the

round hole on the camshaft gear facing up to

the top dead center on the compression

stroke.

Cylinder Head Cover

Bolts

O-ring

Be sure to install the O-ring into the

groove properly.

Bolt

Tensioner Screw

Tensioner  Cap

Round Hole

Punch  Marks