BMW x3 2004 ユーザーズマニュアル

100

When maintaining the headlamps, 
please comply with the instructions in 

the separate Caring for your vehicle bro-
chure.

<

H7 bulb, 55 Watts 

Always wear gloves and eye protec-
tion – the atmosphere within the bulb 

is pressurized. Failure to observe this pre-
caution can lead to personal injury should 
the bulb be damaged.

<

 

1.

Apply the screwdriver from the on-
board tool kit and pull off the lamp 
cover

Caution when handling the screw-
driver, as otherwise personal 

injury can occur or the vehicle can be 
damaged.

<

 

2.

Press the bulb holder downward and 
remove

3.

Remove the bulb, mount a new bulb

4.

Apply the bulb holder with the lower 
edge to the bracket and press it in until 
the lamp base locks in place.

Before replacing the bulb, remove the res-
ervoir for the windshield washing system 
from the bracket. To do so, loosen the bolt, 
refer to arrow, and place the reservoir to 
one side. 

Bear in mind that the windshield 
washing system reservoir is heavy. If 

you do not, injuries or damage to the vehi-
cle can occur.

<

 

For bulb replacement procedure, refer to 
Driver's side.

H7 bulb, 55 Watts 

Always wear gloves and eye protec-
tion – the atmosphere within the bulb 

is pressurized. Failure to observe this pre-
caution can lead to personal injury should 
the bulb be damaged.

<

 

1.

Open the clip and remove the lamp 
cover

2.

Press the bulb holder downward and 
remove, refer to Low beams

3.

Pull off the lamp base; fit a new lamp 
base

Online Edition for Part No. 01 41 0 157 631 - © 07/03 BMW AG