BMW x3 2004 ユーザーズマニュアル
71
Removing the ski bag
Pull the handle forward and remove the ski
bag upward.
bag upward.
Do not position cargo at the opening.
If you do, it can endanger the passen-
If you do, it can endanger the passen-
gers during braking or evasive maneu-
vers.
vers.
<
Cargo area
When loading, observe the information on
page
page
.
Folding rear seat back
Reach into the opening and pull forward,
refer to arrow.
refer to arrow.
When you fold back the backrest, be
sure that the catch engages securely.
sure that the catch engages securely.
The red warning indicator disappears in the
recess when the catch is engaged.
recess when the catch is engaged.
<
Ski bag*
To create a flat load area floor, you can
remove the ski bag before folding the rear
seat back and replace it with a cover. You
will find the cover in the cargo area under
the floor cover.
remove the ski bag before folding the rear
seat back and replace it with a cover. You
will find the cover in the cargo area under
the floor cover.
Cargo area cover
Pull the cargo area cover out by the handle
and hook it in the rear holders.
and hook it in the rear holders.
You can carry light objects such as articles
of clothing on the cargo area cover.
of clothing on the cargo area cover.
Do not place heavy and hard objects
on the cover. If you do so, they could
on the cover. If you do so, they could
endanger occupants during braking
maneuvers. Do not allow the cover to snap
back into place, as otherwise it could be
damaged.
maneuvers. Do not allow the cover to snap
back into place, as otherwise it could be
damaged.
<
Removal
1.
Press the side buttons, refer to arrow 1
2.
Pull the cassette towards the rear, refer
to arrow 2.
to arrow 2.
Installation
Push the cassette forward into the two side
holders until it locks in place.
holders until it locks in place.
Online Edition for Part No. 01 41 0 157 631 - © 07/03 BMW AG