kymco mo mxu250 サービスマニュアル
6. ENGINE REMOVAL/INSTALLATION
6-5
MXU 250
Loosen the inlet hose band screw and then
disconnect the inlet hose from the left
crankcase cover.
disconnect the inlet hose from the left
crankcase cover.
Remove the rear lower mounting bolt and
nut.
Remove the rear upper mounting bolt and
nut.
Remove the front mounting bolts and nuts.
nut.
Remove the rear upper mounting bolt and
nut.
Remove the front mounting bolts and nuts.
Remove the four bolts for remove the left
and right engine brackets.
and right engine brackets.
Screw
Inlet Hose
Mounting Bolt and Nut
Mounting Bolt and Nut
Mounting Bolt and Nut
Bolts
Brackets