Siemens MC35 ユーザーズマニュアル
AT Command Set
MC35_ATC_01_V05.00
Page 199 of 256
15.07.2002
8.13 AT^SLCK Facility lock
Test command
AT^SLCK=?
Response
^SLCK: (list of supported <fac>s) OK
Parameter
See write command
Write command
AT^SLCK=
<fac>,<mode>
[,<passwd>
[,<class>]]
<fac>,<mode>
[,<passwd>
[,<class>]]
Response
This command is used to lock, unlock or interrogate a ME or a network facility
<fac>.
The command can be aborted while network facilities are being set or interro-
gated.
If <mode><>2 and command is successful
OK
If <mode>=2 and command successful
^SLCK: <status>[,<class1>[<CR><LF>
^SLCK: <status>, class2....]] OK
If error is related to ME functionality:
+CME ERROR: <err>
<fac>.
The command can be aborted while network facilities are being set or interro-
gated.
If <mode><>2 and command is successful
OK
If <mode>=2 and command successful
^SLCK: <status>[,<class1>[<CR><LF>
^SLCK: <status>, class2....]] OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameter
<fac> Phone security locks set by user / provider
“PS” Phone locked to SIM card (phone code). ME requests password
when other than current SIM card inserted; ME may remember cer-
tain number of previously used cards thus not requiring password
when they are inserted.
tain number of previously used cards thus not requiring password
when they are inserted.
“SC” SIM (lock SIM cards). SIM requests password upon ME power-up
and when this lock command issued.
“FD” SIM fixed dialling memory: If the mobile is locked to FD, only the
numbers stored to the FD memory can be dialled (up to 7 num-
bers). PIN2 is required as <passwd>.
bers). PIN2 is required as <passwd>.
"CS" Keypad lock (not supported since keypad cannot be connected)
Supplementary Service: Call barring
“AO” BAOC (Bar All Outgoing Calls)
“OI” BOIC (Bar Outgoing International Calls)
“OX” BOIC-exHC (Bar Outgoing International Calls except to Home
Country)
“AI”
BAIC (Bar All Incoming Calls)
“IR”
BIC-Roam (Bar Incoming Calls when Roaming outside the home
country)
country)
“AB” All Barring services (applicable only for <mode>=0)
“AG” All outGoing barring services (applicable only for <mode>=0)
“AC” All inComing barring services (applicable only for <mode>=0)
Factory set facility locks:
“PF” lock Phone to the very First SIM card
“PN”
Network
Personalisation
“PU” Network subset Personalisation
“PP”
Service
Provider
Personalisation
“PC”
Corporate
Personalisation