KTM 200 ユーザーズマニュアル
ENGLISH
38
Check/set distance of the magnetic sensor
The distance between the magnet
2
and the sensor
1
must be 2-4 mm,
otherwise malfunctions on the speedometer might occur.
This distance can be corrected by screwing the sensor
1
in or off.
mm x 3,14
KMH:
WS = mm x 3.14
WS = mm x 3.14
MPH:
WS = (mm x 3.14) : 1.61
WS = (mm x 3.14) : 1.61
1
2
Wheel circumference with standard tires = 2205 mm
Replacing the headlight lamp/parking light lamp
Loosen both rubber bands and tilt the headlight mask to the front. Pull the
parking light lamp with holder
parking light lamp with holder
3
carefully out of the reflector. Pull
connector
4
off the headlamp and remove rubber cap
5
. Disengage retai-
ning clip and take the bulb out of the reflector. When changing the par-
king-light lamp, simply pull it out of the holder.
king-light lamp, simply pull it out of the holder.
Insert a new lamp such that the noses
6
engage in the recesses
7
.When
doing so, do not touch the glass body of the lamp so that it remains free
from fat. Engage retaining clip, mount rubber cap and connector. If the par-
king-light lamp is to be replaced, simply insert it in the holder. Reinsert par-
king-light lamp together with the holder.
Engage the bottom end of the headlamp mask at the retaining pins and fix
the mask by means of the rubber bands.
from fat. Engage retaining clip, mount rubber cap and connector. If the par-
king-light lamp is to be replaced, simply insert it in the holder. Reinsert par-
king-light lamp together with the holder.
Engage the bottom end of the headlamp mask at the retaining pins and fix
the mask by means of the rubber bands.
1
3
4
5
6
7