Yamaha aw16g ユーザーズマニュアル
Introducing the AW16G
22
G
PHANTOM +48V switch
This switch supplies phantom power to MIC/LINE
(XLR) jacks 1/2.
Turn this switch on if you connect condenser mics
requiring external +48V power to MIC/LINE INPUT
(XLR) jacks 1/2.
(XLR) jacks 1/2.
Turn this switch on if you connect condenser mics
requiring external +48V power to MIC/LINE INPUT
(XLR) jacks 1/2.
• You must turn this switch off if a device not requiring
an external power supply is connected to the INPUT
(XLR) 1/2 jacks.
(XLR) 1/2 jacks.
• If phantom power is turned on, power will be supplied
to both the INPUT (XLR) 1/2 jacks.
H
FOOT SW jack
A separately sold foot switch (Yamaha FC5) can be
connected here to control transport operations such
as start/stop, or to perform punch-in/out.
connected here to control transport operations such
as start/stop, or to perform punch-in/out.
Note
Note
The appropriate operation may not occur if you use a
foot switch other than the Yamaha FC5 (or equivalent).
foot switch other than the Yamaha FC5 (or equivalent).
I
MIDI IN connector
J
MIDI OUT/THRU connector
These connectors allow MIDI messages to be
exchanged with external devices.
MIDI IN receives MIDI messages.
MIDI OUT/THRU can be internally switched to
function either as a MIDI OUT jack (which trans-
mits MIDI messages generated within the AW16G)
or MIDI THRU jack (which re-transmits messages
that are received at the MIDI IN jack).
exchanged with external devices.
MIDI IN receives MIDI messages.
MIDI OUT/THRU can be internally switched to
function either as a MIDI OUT jack (which trans-
mits MIDI messages generated within the AW16G)
or MIDI THRU jack (which re-transmits messages
that are received at the MIDI IN jack).
K
DIGITAL STEREO IN/OUT jacks
These are optical jacks that allow digital audio sig-
nals to be exchanged with external devices. They
support the IEC958 consumer format.
nals to be exchanged with external devices. They
support the IEC958 consumer format.
L
Grounding terminal
This is a terminal for electrically grounding the
AW16G. To prevent electrical shock, you must con-
nect this terminal to an electrical ground before you
plug the AC adaptor into an AC outlet. Grounding
will also help prevent hum and noise.
AW16G. To prevent electrical shock, you must con-
nect this terminal to an electrical ground before you
plug the AC adaptor into an AC outlet. Grounding
will also help prevent hum and noise.
M
POWER switch
This switches the power between ON and
STANDBY.
STANDBY.
Note
Note
When switching the power of the AW16G between ON
and STANDBY, you must follow the “Turning the power
on/off” (
and STANDBY, you must follow the “Turning the power
on/off” (
N
DC IN connector
Connect the included AC adaptor (PA-300) to this
connector.
connector.
Use only the included AC adaptor (PA-300) for this unit.
Using other types may be a fire and electrical shock haz-
ard.
Using other types may be a fire and electrical shock haz-
ard.
Front panel
■ CD-RW drive
1
Eject button
This switch ejects the disc tray.
B
Eject hole
This hole allows you to open the disc tray manually.
C
Access indicator
This indicator will light while the CD inserted in the
drive is being accessed.
drive is being accessed.
1
2
3