Yamaha clavinova c l p - 3 8 0 ユーザーズマニュアル
Detailed settings for the voices [VOICE SETTING]
CLP-380 Owner’s Manual
87
Detailed Settings
The pitch of a note can be shifted upward or downward in
steps of an octave.
See the procedure on page 80.
steps of an octave.
See the procedure on page 80.
In Dual mode:
Setting range:
-2 (two octaves lower) – 0 (no pitch shift) – +2 (two octaves
higher)
higher)
You can set the volume level for each voice part.
See the procedure on page 80.
See the procedure on page 80.
In Dual mode:
Setting range:
0 – 127
You can specify the position in the stereo image from
which you hear the sound.
See the procedure on page 80.
which you hear the sound.
See the procedure on page 80.
In Dual mode:
Setting range:
L64 (hard left) – C (center) – R63 (hard right)
The pitch of the two sounds selected in Dual mode can be
“skewed” slightly away from each other.
See the procedure on page 80.
“skewed” slightly away from each other.
See the procedure on page 80.
Setting range:
-20 – +20 (Positive (+) settings will raise the pitch of the first
sound and lower the pitch of the second sound. Negative (–)
settings will do the opposite.)
sound and lower the pitch of the second sound. Negative (–)
settings will do the opposite.)
In Dual mode, parameters with the “*” mark are set for Voice 1 and Voice 2 individually.
Parameter names enclosed in parentheses ( ) are displayed in Dual mode.
Parameter names enclosed in parentheses ( ) are displayed in Dual mode.
Setting the octave
[Octave]*
Setting the volume level
[Volume]*
B
D
NO
YES
A
C
Main Set?-->
Octave 0
Octave 0
B
D
NO
YES
A
C
MainxLayer Set?-->
Octave(GrndPno1) 0
Octave(GrndPno1) 0
Voice for editing (Voice 1 or Voice 2)
B
D
NO
YES
A
C
Main Set?-->
Volume 100
Volume 100
B
D
NO
YES
A
C
MainxLayer Set?-->
Volume(GrndPno1) 100
Volume(GrndPno1) 100
Voice for editing (Voice 1 or Voice 2)
Setting the position of right and left
channels
[Pan]*
Make fine adjustments to the pitch
(only in Dual mode)
[Detune]
B
D
NO
YES
A
C
Main Set?-->
Pan C
Pan C
B
D
NO
YES
A
C
MainxLayer Set?-->
Pan(GrndPno1) C
Pan(GrndPno1) C
Voice for editing (Voice 1 or Voice 2)
B
D
NO
YES
A
C
MainxLayer Set?-->
Detune + 3
Detune + 3