Yamaha elb01e1 ユーザーズマニュアル

ELB-01 Owner’s Manual

120

Music Data Recorder (MDR)

6

Playback of the previously recorded parts starts immediately. The [CUSTOM 
PLAY] button is used here to record only the parts that have been selected for 
recording, and plays back only those parts that have been selected for playback. 
While you listen to the parts being played back, start playing the melody on the 
Upper Keyboard.

When the end of the recorded performance is reached, playback is automatically 
stopped. The length of a subsequently recorded part cannot exceed the length of 
the previously recorded parts.

7

The Lead voice and the Keyboard Percussion can be recorded/played back 
separately although there are no buttons for these parts. Set these in the display 
shown in step 2 on page 119.

Press the PAGE buttons to select Page 3.

Press the [B] button to make the “÷” indicator flash, then use the DATA 
CONTROL dial to select the status for the Lead Voice.

Press the [D] button to make the “÷” indicator flash, then use the DATA 
CONTROL dial to select the status for Keyboard Percussion.

You cannot set both Upper and Lead to “Rec” at the same time; neither can the 
Lower and Keyboard Percussion parts be recorded at the same time.

When you record the 
Keyboard Percussion, make 
sure that the KEYBOARD 
PERCUSSION [1] and/or [2] 
button is set to on.

<PART>    LEAD÷PLAY‹
XG VOL.¿100 KBP÷OFF