Yamaha elb01e1 ユーザーズマニュアル
ELB-01 Owner’s Manual
125
Music Data Recorder (MDR)
6
Press the [MDR] button, and select the destination (blank song).
Select the blank song. For details on selecting a song, see steps 2 and 3 on page
112.
112.
Use the PAGE buttons to select Page 9.
Press the [B] button corresponding to [EXE] (Execute) in the
display.
display.
A message appears, indicating that the Registration data is currently being saved.
After the message disappears, the song to which the Registration is recorded is
automatically named “SONG xx” (“xx” indicates the number).
After the message disappears, the song to which the Registration is recorded is
automatically named “SONG xx” (“xx” indicates the number).
Method 2
First make all the desired settings you want to save, then select
the destination (blank song) as you did in steps 1 and 3 above.
the destination (blank song) as you did in steps 1 and 3 above.
Press the [RECORD] button to enable recording on the M.D.R.
Press the [PLAY/PAUSE] button to record the Registrations, then
press the [STOP] button before the “
press the [STOP] button before the “
REC~~
” indication is shown
at the top right of the display.
This is the same procedure as the one shown when you start recording. The
“REC~~” at the top right of the display indicates that the M.D.R. is recording
the Registrations and being set up for normal recording; pressing the [STOP]
button interrupts this process.
“REC~~” at the top right of the display indicates that the M.D.R. is recording
the Registrations and being set up for normal recording; pressing the [STOP]
button interrupts this process.
3
4
<REG.SAVE> [EXE] ·
___:new song ¸:__
___:new song ¸:__
5
Reference Page
1
2
3
ÃUSB 01 »~~ ⁄
¿ ___:new song
¿ ___:new song
ÃUSB 01 REC~~⁄
¿ ___:new song
¿ ___:new song