Yamaha MLA8 ユーザーズマニュアル

 

ENGLISH

 

XLR-type connectors are wired as follows (IEC60268 standard): pin 1: 
ground, pin 2: hot (+), and pin 3: cold (-).

Yamaha cannot be held responsible for damage caused by improper use 
or modifications to the device.

Always turn the power off when the device is not in use. 

The performance of components with moving contacts, such as switches, 
volume controls, connectors, and fans, deteriorates over time. Consult 
qualified Yamaha service personnel about replacing defective components.

European models
Purchaser/User Information specified in EN55103-1 and EN55103-2.
Inrush Current: 2 A
Conforms to Environments: E1, E2, E3 and E4

 

(5)-1

 

  

 

* Please keep this manual in a safe place for future reference.

 

• Only use the voltage specified as correct for the device. The required 

voltage is printed on the name plate of the device.

• Use only the included power cord.
• Do not place the power cord near heat sources such as heaters or radiators, 

and do not excessively bend or otherwise damage the cord, place heavy 
objects on it, or place it in a position where anyone could walk on, trip over, 
or roll anything over it.

• Do not open the device or attempt to disassemble the internal parts or 

modify them in any way. The device contains no user-serviceable parts. If it 
should appear to be malfunctioning, discontinue use immediately and have 
it inspected by qualified Yamaha service personnel.

• Do not expose the device to rain, use it near water or in damp or wet 

conditions, or place containers on it containing liquids which might spill 
into any openings.

• Never insert or remove an electric plug with wet hands.

• If the power cord or plug becomes frayed or damaged, or if there is a 

sudden loss of sound during use of the device, or if any unusual smells or 
smoke should appear to be caused by it, immediately turn off the power 
switch, disconnect the electric plug from the outlet, and have the device 
inspected by qualified Yamaha service personnel.

• If this device should be dropped or damaged,  immediately turn off the 

power switch, disconnect the electric plug from the outlet, and have the 
device inspected by qualified Yamaha service personnel.

 

• Remove the electric plug from the outlet when the device is not to be used 

for extended periods of time, or during electrical storms.

• When removing the electric plug from the device or an outlet, always hold 

the plug itself and not the cord. Pulling by the cord can damage it.

• Before moving the device, remove all connected cables.
• Do not expose the device to excessive dust or vibrations, or extreme cold 

or heat (such as in direct sunlight, near a heater, or in a car during the day) 
to prevent the possibility of panel disfiguration or damage to the internal 
components.

• Do not place the device in an unstable position where it might accidentally 

fall over.

• Do not use the device in the vicinity of a TV, radio, stereo equipment, 

mobile phone, or other electric devices. Otherwise, the device, TV, or radio 
may generate noise.

• Before connecting the device to other devices, turn off the power for all 

devices. Before turning the power on or off for all devices, set all volume 
levels to minimum.

• Do not insert your fingers or hand in any gaps or openings on the device.
• Avoid inserting or dropping foreign objects (paper, plastic, metal, etc.) into 

any gaps or openings on the device. If this happens, turn off the power 
immediately and unplug the power cord from the AC outlet. Then have the 
device inspected by qualified Yamaha service personnel.

• Do not rest your weight on the device or place heavy objects on it, and 

avoid use excessive force on the buttons, switches or connectors

.