Yamaha MLA8 ユーザーズマニュアル

ENGLISH

8 AC IN connector

Connect the included power cord here. First, connect the 
power cord to the MLA8, then insert the power cord plug 
into the AC outlet.

Be sure to use the included power cord. 
Use of other cords may result in 
malfunction, heat generation, or fire.

9 INPUT 1–8 connectors

These balanced XLR-3-31-type connectors are used to 
input analog signals to the corresponding channels.

) OUTPUT connectors

There are two types of balanced output connectors: 
Euroblock connectors and D-sub 25-pin connector. 

●Euroblock connectors

The device has four Euroblock connectors with six pins. 
These dual channel connectors consist of three pins: 
hot, cold, ground on each channel. The supplied 
Euroblock plugs should be wired as shown. Tighten the 
screws to secure the wires.

●D-sub 25pin connector

Using the optional I/O card (MY8-AD96), you can 
connect to the Yamaha DM2000 Digital Mixer.

You can connect the device to Yamaha digital audio 
equipment using the D-sub 25-pin connector. 
For connection to the DM2000, you will need the optional 
I/O card (MY8-AD96).

+

–

G

OUT PUT

  

D-sub 25-pin cable

Optional I/O card MY8-AD96

Digital mixer DM2000