Yamaha MOX6 ユーザーズマニュアル

Operation flow from starting the application to closing it

MOX6/MOX8 Remote Editor Owner’s Manual

3

The MOX6/MOX8 Remote Editor is a software contained in the MOX6/MOX8 Remote Tools. After installing 
the MOX6/MOX8 Remote Editor and related applications by following the Installation Guide of the MOX6/

MOX8 Remote Tools, follow the instructions below. Before starting, make sure that the MOX6/MOX8 is 
properly connected to the computer via a USB cable. There is no single way to use the many components in 
the MOX6/MOX8 Remote Editor. Your editing needs and preferences may differ; however, the following 

example gives you a simple step-by-step guide in how to use the MOX6/MOX8 Remote Editor.

n 

For details about connection between the MOX6/MOX8 instrument and a computer, refer to the Owner’s Manual of the 
MOX6/MOX8.

n 

On the MOX6/MOX8, press the [UTILITY] to enter the Utility mode, then press the [F6] MIDI followed by the [SF4] OTHER. 
On this display, set the MIDI In/Out parameter to “USB,” then press the [STORE] button to store this Utility setting.

n 

After completing installation of the MOX6/MOX8 Remote Editor, start the DAW software once then quit it. This operation is 
necessary to scan through the DAW software for obtaining the VSTi-related information. Only DAW software produced by 
Steinberg (such as Cubase) can be scanned.



 

 [Yamaha MOX6_MOX8 Remote Editor] [MOX6_MOX8 



 



 



 

The Auto Sync window appears and the settings of the 50 Control Templates on the MOX6/MOX8 are 
transferred automatically to the Current Bank (

) of the MOX6/MOX8 Remote Editor.