Yamaha RX-V1900BL ユーザーズマニュアル

Press F

ID repeatedly using a ballpoint pen or 

similar object on the remote control to select the 
desired remote control ID.
Each time you press FID, the remote control ID indicator 
changes as shown below.

y

To set the remote control ID of the simplified remote control, 
see page 98 for details.

■ SIRIUS Satellite Radio Parental Lock 

SIRIUS PIN

Use this feature to set the code number for the SIRIUS 
Satellite Radio Parental Lock feature to the initial factory 
setting.

■ Tuner frequency step  

TUNER FRQ STEP

Use this feature to set the tuner frequency step according 
to the frequency spacing in your area.

■ Bi-amplifier mode

BI-AMP

Use this feature to activate or deactivate the bi-amplifier 
function.

When “BI-AMP” is set to “ON”, the SURROUND BACK 
terminals cannot be used to connect surround back speakers in 
that the terminals are already used for the bi-amplifier 
connection (page 15).

■ Parameter initialization

INITIALIZE

Use this feature to reset the parameters of this unit to the 
initial factory settings. You can select the category of 
parameters to be initialized.

y

To initialize the parameters of each sound field program, use 
"INITIALIZE" in the sound field program menu (

).

■ HDMI monitor check

MONITOR CHECK

Use this feature to activate or deactivate the monitor check 
function of this unit.

RESET

Sets the code number to the initial factory setting.

Cancels the reset of the code number.

AM10/
FM100

Select this setting for North, Central and South 
America.

Select this setting for all other countries.

ON

Select this setting if you want to activate the bi-
amplifier function.

Select this setting if you want to deactivate the bi-
amplifier function.

DSP 
PARAM

Select this setting to initialize all the parameters of 
the sound field parameters (page 67).

VIDEO

Select this setting to initialize all the parameters in 
“VIDEO MENU” and “OSD SHIFT” and “GRAY 
BACK” in “DISPLAY SET”.

ALL

Select this setting to initialize all the parameters of 
this unit.

Select this setting to cancel the initialization 
procedure.

This unit receives the information of the available 
video signal resolutions from the video monitor 
connected via HDMI and you can only select the 
resolutions supported by the video monitor in 
“HDMI RES.” (page 81).

SKIP

You can select any resolution in “HDMI RES.” 
(page 81).