ICOM rs-rp2c ユーザーズマニュアル
8
2
SYSTEM SETUP
■ Control software settings
D
D dsgwd.conf screen description
— Zone Repeater’s Information —
q ZR_ADDR
q ZR_ADDR
Sets the zone repeater’s IP address
(the IP address
n in D Setup Example)
.
The same IP address that is programmed in “IP”
(for
the ID-RP1D maintenance)
or “IP Address”
(for the util-
ity for ID-RP2C)
cell in “Communication Settings”
should be set.
w ZR_CALLSIGN
Sets the zone repeater’s call sign.
The same call sign that is programmed in “Callsign”
cell in “General” of the ID-RP1D maintenance or the
utility for ID-RP2C should be set.
cell in “General” of the ID-RP1D maintenance or the
utility for ID-RP2C should be set.
e ZR_PORT
Sets the zone repeater’s transmit/receive port num-
ber
ber
(the port number n in D Setup Example)
.
The same port number that is programmed in “Port”
cell in “Communication Settings” of the ID-RP1D
maintenance or the utility for ID-RP2C should be set.
cell in “Communication Settings” of the ID-RP1D
maintenance or the utility for ID-RP2C should be set.
— DNS Server’s Information —
r DNS_ADDR
r DNS_ADDR
Sets the zone DNS server’s IP address
(the IP ad-
dress c in D Setup Example)
.
t DNS_MAC
Sets the zone DNS server’s MAC address
(the MAC
address c in D Setup Example)
.
Set the MAC address of the connected router with
dividing by hyphen (-).
dividing by hyphen (-).
— GW’s Information —
y GW_ETHIFNAME
y GW_ETHIFNAME
Sets the interface name of the LAN card
(the inter-
face name v in D Setup Example)
.
The interface name can be confirmed with the “if-
config” command.
config” command.
u GW_VCPORT
Sets the port number for voice operation
(UDP)
.
Use the default setting.
i GW_DTPORT
Sets the port number for data operation
(TCP)
.
Use the default setting.
o GW_ZRPORT
Sets the port number of the gateway server self for
the communication with the zone repeater
the communication with the zone repeater
(UDP)
.
Use the default setting.
— IP Server’s Information —
!0 MGSV_QRPORT
!0 MGSV_QRPORT
Sets the port number of the IP address managing
server for call sign inquiry
server for call sign inquiry
(UDP)
.
Use the default setting.
!1 MGSV_UDPORT
Sets the port number of the IP address managing
server for updated location information request
server for updated location information request
(UDP)
.
Use the default setting.
— GW connection —
!2 CON_WAIT_INTERVAL
!2 CON_WAIT_INTERVAL
Sets the application timer.
The application timer is the waiting timer
(unit: sec-
ond)
until the connection is succeeded when mak-
ing a new connection to another gateway in data
mode operation.
mode operation.
Use the default setting.
!3 CON_REFRESH_INTERVAL
Sets the decide timer
(unit: second)
to impossible to
connect to the gateway which is failed in connection
once in data mode operation.
Use the default setting.
once in data mode operation.
Use the default setting.
!4 CON_MAX_GW
Sets the maximum number of simultaneous con-
nections to another gateway in data mode opera-
tion.
Use the default setting.
nections to another gateway in data mode opera-
tion.
Use the default setting.
q
w
e
r
t
y
u
i
o
!0
!1
!2
!3
!4