Sharp AR-157E ユーザーズマニュアル
35
6
4
Raise the fusing unit release lever, close the front cover and
then close the side cover by pressing the round projections
near the side cover open button. The misfeed (
then close the side cover by pressing the round projections
near the side cover open button. The misfeed (
) indicator will
go out and the start (
) indicator will light up.
D: Misfeed in the lower paper feed area
1
Open the lower side cover
(under the multi-bypass
tray) and remove the misfed
paper. If the misfeed (
(under the multi-bypass
tray) and remove the misfed
paper. If the misfeed (
)
indicator blinks and the
misfed paper is not seen
from the area of the lower
side cover, pull out the
lower paper tray and remove
the misfed paper. Then
close the lower paper tray.
misfed paper is not seen
from the area of the lower
side cover, pull out the
lower paper tray and remove
the misfed paper. Then
close the lower paper tray.
2
Close the lower side cover.
3
Close the side cover by pressing the round projections near
the side cover open button. The misfeed (
the side cover open button. The misfeed (
) indicator will go
out and the start (
) indicator will light up.
E: Misfeed in the RSPF/SPF
An original misfeed may occur at one of three locations: if the misfed original is seen
from the original feeder tray, (A) in the original feeder tray; if the misfed original is not
seen from the original feeder tray, (B) in the exit area or (C) under the feeding roller.
Remove the misfed original following the instructions for each location.
from the original feeder tray, (A) in the original feeder tray; if the misfed original is not
seen from the original feeder tray, (B) in the exit area or (C) under the feeding roller.
Remove the misfed original following the instructions for each location.
(A) Open the feeding roller cover and pull the original gently to the left and out
from the original feeder tray. Close the feeding roller cover. Open and close
the RSPF/SPF to clear the RSPF/SPF misfeed (
the RSPF/SPF to clear the RSPF/SPF misfeed (
) indicator. If the misfed
original cannot be easily removed, proceed to (C).
When closing the covers, be sure to close the front cover securely and
then close the side cover. If the covers are closed in the wrong order,
the covers may be damaged.
then close the side cover. If the covers are closed in the wrong order,
the covers may be damaged.
Feeding roller cover