Epson photopc l-500v ユーザーズマニュアル
44
Images are too dark (underexposed) or too bright
(overexposed).
(overexposed).
◗
Make sure the flash is not set to
flash off.
However, if you are shooting a close-up in macro
mode, you should try using the
mode, you should try using the
flash off setting.
◗
If you are using the flash, make sure you are the right
distance from your subject: between 2.3 and 17.1
feet (in wide-angle mode) and 1.6 to 9.9 feet (in
telephoto mode). See the Reference Guide for details.
distance from your subject: between 2.3 and 17.1
feet (in wide-angle mode) and 1.6 to 9.9 feet (in
telephoto mode). See the Reference Guide for details.
◗
If you are using manual mode, you can adjust the
exposure compensation or light sensitivity settings.
See page 20 and the Reference Guide for instructions.
exposure compensation or light sensitivity settings.
See page 20 and the Reference Guide for instructions.
Miscellaneous Problems
Your photo won’t print.
Make sure you have room for one or two more photos on
your memory card so the camera can temporarily store
data on it while your photos are printing.
your memory card so the camera can temporarily store
data on it while your photos are printing.
The color is incorrect or lines appear on the printed
photo.
photo.
◗
Make sure you load the correct type and size of paper
in your printer; see page 33 for details.
in your printer; see page 33 for details.
◗
You may need to run one of the printer utilities. See
the instructions that came with your printer.
the instructions that came with your printer.