Manualsbrain.com
  1. マニュアル
  2. ブランド
  3. Sharp
  4. PG-LX3500
  5. ユーザーズマニュアル

Sharp PG-LX3500 ユーザーズマニュアル

ダウンロード
ページ / 77
59
Useful 
    
   
Featur
es
Using 3D Viewing Mode
Use the following procedure to project 
3D images. 
For operation of the 3D LCD shutter 
glasses and the 3D-video playback 
equipment, see the corresponding 
operation manual.
O
/Q
 buttons 
ENTER button 
3D MODE button 
Projecting 3D images
1
  Turn the projector on.
2
  Turn the 3D-video playback 
equipment on.
• Set the 3D­video playback equipment so
that it outputs one of the signals listed in
the Compatibility Chart in this operation
manual.
3
  Switch the Input mode of the 
projector to enable input of 3D 
video signals.
4
  Operate the 3D-video playback 
equipment and play back the 3D 
content.
5
  Turn the 3D LCD shutter glasses 
on and place them over your eyes.
6
  Press 3D MODE on the remote 
control to display the 3D MODE 
menu.
Info
• If “An invalid button has been pressed.”
is displayed, a 3D­compatible signal is
not being input. Check the output signal
on the playback equipment.
7
  Press Q to set “DLP
®
 Link™” to 
“On”.
8
  Press ENTER to switch the mode 
and enable more natural 3D 
image viewing.
Warning!
• If the projector, 3D­video playback
equipment, and 3D LCD shutter
glasses are not properly set, you may
experience eye strain in addition to not
being able to view the images in 3D.
9
  Press 3D MODE.
• The 3D MODE menu will disappear.
• If the images are not displayed in 3D, repeat
steps 6 to 8.
• You can also use “DLP
®
Link™” and “DLP
®
Link™ Invert” on the menu screen to change
the 3D setting.
Note
Ending 3D projection
1
  Press 3D MODE on the remote 
control to display the 3D MODE 
menu.
2
  Press O to set “DLP
®
 Link™” to 
“Off”.
3
  Press 3D MODE.
• The 3D MODE menu will disappear.
Viewing Stereoscopic 3D Images (Continued)