Tascam RS-232C HD-R1 ユーザーズマニュアル

TASCAM HD-R1

4–Recording

Making settings related to recording

Use this unit to record audio as WAV or MP3 format

files. Recording is conducted in the same manner as

with a conventional recorder.

Before recording, use the Menu to select, for example,

the recording file format (WAV/MP3), the sampling

rate, the bit length (WAV) or bit rate (MP3), the

stereo/mono setting, the input source and other

standard settings. In addition to these, various other

settings can be made as necessary. (See “Record

Settings” in the Owner’s Manual.)
In addition, if the input source is set to analog input,

the rear panel switches are also used to make some

settings related to input.
1 Press the

key.

The Main Menu appears.
2 Use the

SHUTTLE/DATA

wheel to select

Record

Settings

, and press the

ENTER

key.

The Record Settings Menu appears.

NOTE

When the Home Screen is open, you can press the ENTER

key while holding down the MENU key (SHIFT key) to open
the Record Settings Menu directly.

Recording file format, stereo/mono and input source

are selected in the following procedures.
3 Use the

SHUTTLE/DATA

wheel to select

File

Format

, and press the

ENTER

key.

4 Use the

SHUTTLE/DATA

wheel to select

WAV

MP3

, and press the

ENTER

key.

If WAV is selected:
5a Use the

SHUTTLE/DATA

wheel to select

WAVE

Settings

, and press the

ENTER

key.

The Wave Settings submenu appears.

With this Menu, you can set the sampling

rate (

WAVE Sample Rate

) and bit depth

(

Sample Width

Use the

SHUTTLE/DATA

wheel to select the

item to set, and press the

ENTER

key. Use the

SHUTTLE/DATA

wheel to make the setting and

press the

ENTER

key again to confirm it.

WAVE Sample Rate: 44.1 kHz, 48 kHz, 88.2 kHz or 96

•

kHz
Sample Width: 16-bit or 24-bit

•

NOTE

When the input source is S/PDIF, if the input signal sample

rate differs from the sample rate setting, the unit cannot
record and an error message appears.

If MP3 is selected:
5b Use the

SHUTTLE/DATA

wheel to select

MP3

Settings

and press the

ENTER

key.

The MP3 Settings submenu appears.

Use this Menu to set the sampling rate (MP3

Sample Rate) and bit rate (Stereo Bit Rate,

Mono Bit Rate). The bit rates can be set sepa-

rately for stereo and mono recording.

Use the

SHUTTLE/DATA

wheel to select the

item to set and press the

ENTER

key. Use the

SHUTTLE/DATA

wheel to make the setting and

press the

ENTER

key again to confirm it.

MP3 Sample Rate: 44.1 kHz or 48 kHz

•

NOTE

When the input source is S/PDIF, if the input signal sample

rate differs from the sample rate setting, the unit cannot
record and an error message appears.

Stereo Bit Rate: 64 kbps, 80 kbps, 96 kbps, 112 kbps,

•

128 kbps, 160 kbps, 192 kbps, 224 kbps, 256 kbps or
320 kbps
Mono Bit Rate: 32 kbps, 40 kbps, 64 kbps, 80 kbps,

•

96 kbps, 112 kbps, 128 kbps or 160 kbps

6 After completing the setting procedures in 5a

or 5b, press the

CANCEL

key to return to the

Record Settings Menu.