Sharp UP-600 ユーザーズマニュアル

You can delete UPCs and customers that had not been accessed for a certain period.  You can
program a period in the PGM2 mode.  As for customer, you can also delete customers with
regardless to a non-accessed period.
Follow the procedure shown below.

Move the mode key to X1/Z1 position.

Select “6 UPC DELETE”.

Select “1 READING” to take a report, or “2 DELETE” to delete non-accessed UPCs.

When you select “2 DELETE”, select whether you want to delete all the non-accessed UPCs (1 ALL
DELETE) or delete the non-accessed UPCs individually (2 IND.DELETE).

It is recommended to take a report first before executing deleting operation.

Move to the mode key to X1/Z1 position.

Select “6 UPC DELETE”.

Select “3 D-UPC CLEAR” to clear by designated range, “4 D-UPC CLR PICK” to clear by pick up
codes (see the “NOTE” on page 66), or “5 D-UPC CLR DEPT” to clear by associated department.

Move the mode key to X2/Z2 position.

Select “5 NO ACCESS. CUST.”.

Select “1 READING” to take a report, or “2 DELETE” to delete non-accessed customers.

When you select “2 DELETE”, select you want to delete all the non-accessed customers (1 ALL
DELETE) or delete the non-accessed customers individually (2 IND.DELETE).

It is recommended to take a report first before executing deleting operation.

Move the mode key to X2/Z2 position.

Select “6 CUSTOM DELETE”.

Specify the range (start/end customer codes) you want to delete.

X2/Z2 MODE

X1/Z1 MODE