Sharp AR-168D ユーザーズマニュアル

Problems related to general use of the machine, the copy function, and software 
setup are explained here. Be sure to check the problem carefully before calling for 
service, as many problems can be solved by the user.
If you are unable to solve the problem, turn off the main switch, unplug the power 
cord from the outlet, and contact your dealer.

When the following indicators light up or blink on the operation panel or the following 
alphanumeric codes appear in the display, solve the problem immediately referring 
to both the table below and the indicated page.

For problems related to the printer and scanner functions, see the 
online manual.

Be sure to use only genuine SHARP parts and supplies.

Tray 
location 
indicator

Blinks

BYPASS : ADD 
PAPER

The indicated paper tray is not 
attached, is attached incorrectly, or has 
run out of paper. (The tray is indicated 
in <*>.)

15

TRAY<*> : ADD 
PAPER
CLOSE PAPER 
TRAY<*> 

Error 
indicator

Blinks

CLEAR PAPER 
JAM.

A paper misfeed has occurred.
Remove the misfeed as explained in 
"MISFEED REMOVAL".

79

SPF/RSPF JAM.
FRONT OR SIDE 
COVER OPEN. 
CLOSE COVERS.

The cover is open. Close the cover.

-

CLOSE THE SPF/
RSPF COVER.

The SPF/RSPF cover is open. Close the 
SPF/RSPF cover.

82

REPLACE THE 
TONER 
CARTRIDGE.

The toner cartridge is empty. Replace 
the toner cartridge with a new 
cartridge. (When the indicator blinks, 
the machine does not operate.)

83

SYSTEM ERROR 
[XX - XX] REFER 
TO USER GUIDE

When [L1-00] appears, the scan head 
locking switch is locked. Turn off the 
power, release the scan head locking 
switch, and turn the power back on.

86

The machine will not function. Turn the 
power switch off, wait about 10 seconds, 
and then turn on the switch again. If this 
does not clear the error, remove the 
power cord from the outlet, and contact 
your SHARP service center.

-