Sharp R-425L ユーザーズマニュアル

The outside surface is painted. Clean the outside with 
mild soap and water; rinse and dry with a soft cloth. Do 
not use any type of household or abrasive cleaner.

Wipe the window on both sides with a damp cloth to 
remove any spills or spatters. Metal parts will be easier 
to maintain if wiped frequently with a damp cloth. 
Cleaners which are marked specifi cally for use with 
stainless steel may be used for stainless steel model. 
Follow package directions exactly. Avoid the use of any 
harsh cleaners or one not marked for stainless steel use 
as they may stain, streak or dull the door surface.

Care should be taken in cleaning the touch control panel. 
If the control panel becomes soiled, open the oven door 
before cleaning. Wipe the panel with a cloth dampened 
slightly with water only. Dry with a soft cloth. Do not 
scrub or use any sort of chemical cleaners. Close door 
and touch STOP/CLEAR.

Cleaning is easy because little heat is generated to         
the interior surfaces; therefore, there is no baking and 
setting of spills or spattering. To clean the interior 
surfaces, wipe with a soft cloth and warm water. DO 
NOT USE ABRASIVE OR HARSH CLEANERS OR 
SCOURING PADS. For heavier soil, use baking soda 
or a mild soap; rinse thoroughly with hot water.             
NEVER SPRAY OVEN CLEANERS DIRECTLY ONTO 
ANY PART OF THE OVEN.

The waveguide cover is made from mica so requires 
special care. Keep the waveguide cover clean to assure 
good oven performance. Carefully wipe with a damp 
cloth any food spatters from the surface of the cover 
immediately after they occur. Built-up splashes may 
overheat and cause smoke or possibly catch fi re.  Do 
not remove the waveguide cover. 

Occasionally, a cooking odor may remain in the oven. To 
remove, combine 1 cup/250 ml water, grated peel and juice 
of 1 lemon and several whole cloves in a 2-cup/500 ml 
glass measuring cup. Boil for several minutes using 100% 
power. Allow to set in oven until cool. Wipe interior with a 
soft cloth.

The turntable and turntable support can be removed 
for easy cleaning. Wash them in mild, sudsy water; for 
stubborn stains use a mild cleanser and non abrasive 
scouring sponge. They are also dishwasher-proof. Use 
upper rack of dishwasher. The turntable motor shaft is 
not sealed, so excess water or spills should be wiped 
up immediately.

C L E A N I N G   A N D   C A R E