Scientific Atlanta 4240C ユーザーズマニュアル

5

To connect your set-top to your entertainment devices, complete these steps.

!

Do not turn on the set-top or TV yet.

Identify the additional devices you 
will connect to the set-top and TV. 
See the Connection Diagrams 
section of this guide.

Wait several minutes for the set-top to receive the latest software, programming, and 
service information. One of the following will display on the front panel of the set-top:
•  Current time         •  Four dashes (----) 

Notes:  -  If the current time appears, the update is complete.

    -  If four dashes appear, you must call your service provider to get the  

 

    set-top 

authorized.

Connect the coaxial cable that carries the signal from your cable service provider to 
the CABLE IN connector on the back panel of the set-top.

Connect your SDTV to the set-top. See the Connection Diagrams section of this 
guide. 

Plug the set-top and the TV into an AC power source.
Important: To protect the set-top from power surge damage, ground (earth) your 
cable product to provide some protection against voltage surges and built-up static 
charges. To avoid these voltage surges that can be caused by lightning storms and 
power outages, plug the set-top into a surge protector to reduce the risk of damage.

To begin watching TV, turn the TV on, and press POWER on the front panel of the 
set-top or on the remote control.