Zebra 50-12500-066 ユーザーズマニュアル

USB INTERFACE

8 - 3

To connect the USB interface:

Attach the modular connector of the USB interface cable to the host port on the bottom of the linear imager 
scanner cradle (see 

Plug the series A connector in the USB host or hub, or plug the Plus Power connector in an available port 
of the IBM SurePOS terminal.

Select the USB device type by scanning the appropriate bar code from 

On first installation when using Windows, the software prompts to select or install the Human Interface 
Device driver. To install this driver, provided by Windows, click Next through all the choices and click 
Finished on the last choice. The cradle powers up during this installation.

To modify any other parameter options, scan the appropriate bar codes in this chapter.

If problems occur with the system, see 

.

Interface cables vary depending on configuration. The connectors illustrated in 

 are examples 

only. The connectors may be different than those illustrated, but the steps to connect the linear imager 
scanner cradle remain the same. Ensure you use the matching cable for the appropriate cradle.