Hitachi VM-E54A ユーザーズマニュアル

Getting Started 

 

22

use a polarized cord or outlet accessory. 
2. Align the arrow on the external power adapter with the guide arrow on the 
camera/recorder. 
3. Hold the external power adapter firmly against the camera/recorder while sliding it 
towards the right of the machine. 
4. Connect the external power adapter plug to the DC OUTPUT jack of the AC 
adapter/charger. 

Note: The AC adapter/charger can be used around the world. An AC plug adapter is 
required in some foreign countries. If you need one purchase it at your Hitachi distributor. 

 

Note: The battery level indicator sometimes displays partial charge symbol when using the 
AC adaptor/charger. Ignore this indicator when using the AC adaptor/charger. 

The camera/recorder can be powered with six alkaline dry-cell batteries inserted into the 
optional battery case (Hitachi VM-BP86C) which can be attached to the 
camera/recorder. The operation time of the camera/recorder depends on the type of 
alkaline batteries used. Please ensure that the CAMERA/OFF/VIDEO switch is in the 
OFF position whenever attaching or detaching any power supply (ie. battery, AC 
adapter/charger, etc.) 
Alkaline Battery Case Diagram 

1. Insert six "AA" alkaline dry-cell batteries as shown, being sure not to confuse their 
polarity. 
2. Align the arrow on the battery case with the guide arrow on the camera/recorder. 
3. Hold the battery case firmly against the camera/recorder while sliding it towards the 
right of the machine. 

Note: At extremely low temperatures operation time decreases, while at high temperatures 
these batteries may be damaged. 
Note: Ordinary manganese batteries cannot be used. 
Note: Attach the battery case immediately before you start recording.