Tascam vl-a4-vl-a5 ユーザーズマニュアル

0

0

VL-A4

Rear Panel

Front Panel

VL-A5

Rear Panel

Front Panel

VL-A8

Rear Panel

Front Panel

1

This ~ IN jack is used to connect the supplied power cord.

2

This unit is equipped with a fuse. lf the unit does not

work, disconnect the power plug from the AC outlet and

then contact the nearest qualified service personnel.

3

This is used to turn the power on and off.

4

This is a balanced input terminal that uses an XLR balanced

cable and TRS PHONE balanced cable combination jack.

This INPUT jack connects the unit to an external device.

5

This is used to adjust the output volume.

6

This indicator lights up when the power switch is turned

on and AC power is supplied to the ~ IN jack.

7

This is used to adjust the treble level.

+

1.5 dB 8k: Boosts the 8 kHz frequency by 1.5 dB.

+1.5 dB 3k: Boosts the 3 kHz frequency by 1.5 dB.
-1.5 dB 8k: Cuts the 8 kHz frequency by 1.5 dB.
-1.5 dB 3k: Cuts the 3 kHz frequency by 1.5 dB.

8

This is used to adjust the bass level.

LF+: Boosts the 150 Hz or 800 Hz frequency by 1.5 dB.

LF-: Cuts the 150 Hz or 800 Hz frequency by 1.5 dB.

LF CUT: Cuts bass sounds at a frequency of 500 Hz or lower.