Trimble Outdoors thunderbolt 64057-00-eng ユーザーズマニュアル
Trimble ThunderBolt E GPS Disciplined Clock User Guide
63
Trimble Standard Interface Protocol
A
C
CAUTION – The operation of ThunderBolt E can be affected adversely if incorrect data is
entered in the fields associated with packet 0xBB.
entered in the fields associated with packet 0xBB.
Note – When sending packet 0xBB, fields that are specified as "do not alter" or if you do not
want to alter a specific field, send a value of 0xFF for UINT8 types and a value of -1.0 for
floating point types. ThunderBolt E will ignore these values.
want to alter a specific field, send a value of 0xFF for UINT8 types and a value of -1.0 for
floating point types. ThunderBolt E will ignore these values.
Command Packet 0xBC: Set Port Configuration
TSIP packet 0xBC is used to set and query the port characteristics. In query mode,
packet 0xBC is sent with a single data byte and returns report packet 0xBC.
packet 0xBC is sent with a single data byte and returns report packet 0xBC.
Note – The input and output baud rates must be the same.
Command Packet 0 x BC Data Format (Query Mode)
The table below lists the individual fields within the packet 0xBC when used in the set
mode and when read in the query mode.
mode and when read in the query mode.
Command and Report Packet 0xBC Field Data Format
Byte
Item
Type
Value
Meaning
0
Port Number UINT8
0
Port 1 (standard)
1
Port 2 (not available)
0xFF
Current port
Byte
Item
Type
Value
Meaning
0
Port to Change
UINT8
0
Port 1 (standard)
1
Port 2 (factory only)
0xFF
Current port
1
Input Baud Rate
UINT8
6
4800 baud
7
9600 baud
8
19200 baud
9
38400 baud
10
57600 baud
11
115200 baud
2
Output Baud Rate
UINT8
As above
As above
3
# Data Bits
UINT8
2
7 bits
3
8 bits
4
Parity
UINT8
0
None
1
Odd
2
Even
5
# Stop Bits
UINT8
0
1 bit
1
2 bits