Epson expression 1680 ユーザーズマニュアル

Using Optional Equipment

To prevent damage during shipping, a shipping screw is attached to the transparency 
unit to secure its lamp assembly. You must remove this screw before using the 
transparency unit.

1. Turn the transparency unit so the glass side faces up.

2. Use a Phillips (cross 

head) screwdriver to 
remove the shipping 
screw from the hole 
labeled 

CLAMP

, as 

shown at right.

3. Install the screw in the 

storage hole labeled 

STOCK

.

Caution: Before transporting the transparency unit, follow the procedures on 
page 36 to protect it from damage.

1. Make sure the scanner is turned off. 

2. Remove the document cover by 

grasping the back of the document 
cover and easing the cover up.

3. Make sure the document table is 

clean and dust free.

4. Position the slots on the transparency 

unit’s mounting bracket over the 
heads of the two mounting screws 
located at the back of the scanner.

1680.book  Page 21  Wednesday, April 9, 2003  4:09 PM