Epson expression 1680 ユーザーズマニュアル

Solving Problems

Here are some troubleshooting tips if you’re having trouble setting up your scanner, 
scanning, or getting the quality you want from your scans.

READY

■

The 

READY

 light flashes when 

scanning is in progress. If you are 
scanning a large file, wait for 
scanning to finish.

■

Make sure the scanner power cord 
is securely plugged into the 
scanner and the power outlet, and 
that the scanner is on. If the 
scanner was unplugged or off, 
restart your computer before trying 
to scan.

■

Check that the power outlet is 
working and provides sufficient 
power for the scanner.

■

If you’re using a transparency unit 
or automatic document feeder and 
both the 

READY

 and 

ERROR

 

lights are off, make sure your 
installed option is closed (lying flat 
against the scanner). Reconnect 
your unit to the 

OPTION

 

connector on the back of the 
scanner. 

■

Make sure your automatic 
document feeder isn’t out of paper 
and doesn’t have a paper jam. 

■

Make sure you removed the 
shipping screw from the hole labeled 

CLAMP

 in your transparency unit. 

■

Make sure the SCSI ID is set 
between 1 and 6. If you reset the 
SCSI ID switch on the back of the 
scanner, turn the scanner off and 
then on again. Then restart your 
computer.

■

Check your cable connections. If 
your cable is securely connected to 
both the scanner and computer, try 
another cable, then restart your 
computer.

■

Make sure your scanner is on. If it 
was off, turn the scanner on first, 
then restart your computer before 
you try to scan. 

1680.book  Page 41  Wednesday, April 9, 2003  4:09 PM