HP Compaq KB-9965 311059-181 ユーザーズマニュアル

To remove the CD-ROM drive: 

1.  Prepare the server for a non-hot-plug procedure. Refer to “Preparing the Server for 

Non-Hot-Plug Procedures” in this chapter. 

2.  Remove the front bezel door (tower model only), and lay the server on its side with the 

access panel facing upward. Refer to “Removing the Front Bezel Door (Tower Model 
Only)” in this chapter. 

3.  Remove the access panel. Refer to “Removing the Access Panel” in this chapter. 

4.  Remove the hot-plug processor fan. Refer to “Hot-Plug Fans (Processor and I/O)” in this 

chapter. 

5.  Remove the fan basket. Refer to “Fan Basket” in this chapter. 

6.  Remove the processor fan bracket. Refer to “Processor Fan Bracket” in this chapter. 

7.  Open the system tray. Refer to “Opening the System Tray” in this chapter. 

8.  Disconnect the power and signal cables from the CD-ROM drive. Refer to “Diskette and 

CD-ROM Drive Cables” in this chapter. 

9.  Loosen the thumbscrew located near the bottom of the fan basket to release the metal 

locking bracket (1). 

10.  Slide the metal locking bracket outward (2). 

11.  Push the CD-ROM drive out of the front of the chassis (3). 

 

Reverse steps 1 through 11 to replace the CD-ROM drive.