Sharp aquos lc 57d90u ユーザーズマニュアル
23
Press a/b to select ANALOG, DIGITAL (Air),
DIGITAL (Cable) or CableCARD, and then
press ENTER.
DIGITAL (Cable) or CableCARD, and then
press ENTER.
5
Basic adjustment settings
Channel memory setting
• On: Skips channels. (Channel selection disabled using
CH
r
r
r
r
r/s
s
s
s
s.)
• Off: Does not skip channels. (Channel selection enabled
using CH
r
r
r
r
r/s
s
s
s
s.)
NOTE
• Make sure what kind of connection is made with your TV.
Antenna Setup – DIGITAL – Air
In order to receive digital air broadcasts, you need a digital
broadcast antenna. You can confirm the antenna
configuration through the “Antenna Setup - DIGITAL” screen.
broadcast antenna. You can confirm the antenna
configuration through the “Antenna Setup - DIGITAL” screen.
If necessary, adjust the direction of the antenna to obtain
the maximum signal strength.
the maximum signal strength.
Signal Strength
Press MENU and the MENU screen displays.
Press c/d to select “Setup”.
Press a/b to select “CH Setup”, and then
press ENTER.
press ENTER.
• If you already set the Secret No., input the 4-
digit secret number here. See page 54 for
setting a secret number.
setting a secret number.
Press a/b to select “CH Memory”, and then
press ENTER.
press ENTER.
Perform the following steps after confirming
the type of antenna connection made with
your TV, and the channel type selected in
Step 5.
When viewing ANALOG broadcasts:
1 Press a/b, and then press c/d to select
the type of antenna connection made with
your TV, and the channel type selected in
Step 5.
When viewing ANALOG broadcasts:
1 Press a/b, and then press c/d to select
the channel to skip or not.
2 Press a/b to select “Skip”, and then press
c/d to select “On” or “Off”.
When viewing DIGITAL broadcasts:
1 Press a/b to select the channel to skip or
1 Press a/b to select the channel to skip or
not, and then press c/d to select “On” or
“Off”.
“Off”.
Press MENU and the MENU screen displays.
Press c/d to select “Setup”.
Press a/b to select “Antenna Setup -
DIGITAL”, and then press ENTER.
• If you already set the Secret No., input the 4-
DIGITAL”, and then press ENTER.
• If you already set the Secret No., input the 4-
digit secret number here. See page 54 for
setting a secret number.
setting a secret number.
Press a/b to select “Signal Strength”.
• The signal strength of the DIGITAL (Air) antenna
• The signal strength of the DIGITAL (Air) antenna
is displayed. The signal information is based
on the current channel.
on the current channel.
Signal Strength
Channel Strength
Cable Reception
Signal Strength
Current
Max
0
0
Press a/b to select “Channel Strength”, and
then press ENTER.
then press ENTER.
Input the 2-digit channel number to check
the signal strength of the selected channel.
the signal strength of the selected channel.
• Make sure the signal is strong enough for each
channel.
Signal Strength
Current
CH
Max
0
1 2
0
Signal Strength
Channel Strength
Cable Reception
Channel Strength
• The channel signal strength can also be checked separately.
Repeat steps 1 to 3 in Signal Strength in
Antenna Setup - DIGITAL - Air.
Antenna Setup - DIGITAL - Air.
NOTE
• This function is available for DIGITAL (Air) only.
1
2
3
4
6
1
2
3
4
1
2
3
Press MENU to exit.
7
Press MENU to exit.
5
Press MENU to exit.
4
LC-57D90U(E)-021-025
06.1.13, 7:27 AM
23
Black