Sharp AL-1651CS ユーザーズマニュアル

The following originals cannot be used. These may cause misfeeds or smudging and 
unclear images.
• Transparencies, tracing paper, other transparent or translucent paper, and 

photographs.

• Carbon paper, thermal paper.
• Originals that are creased, folded, or torn.
• Glued originals, cut-out originals.
• Originals with binder holes.
• Originals printed using an ink ribbon (thermal transfer printing), originals on 

thermal transfer paper.

"SET ORIGINALS FOR STREAM FEEDING" will appear in the display for five 
seconds after all originals are fed. If a new original is placed in the RSPF during this 
time, the original will be automatically fed in and copying will begin with the same 
setting. The stream feeding mode is disabled in "STREAM FEEDING" in the user 
programs (p.65).

Press the numeric keys to set the number of copies.

The set number of copies appears in the display. A maximum of 99 copies can be set.
If you wish to make only a single copy, copying is possible with the display 
showing "0".

When copying onto paper larger than 8-1/2" x 11" size, pull out the 
paper output tray extension.

If you enter the wrong number, press the [CLEAR] key (

) and 

enter the correct number.

OPY
x11   55