Sharp AL-1651CS ユーザーズマニュアル
SET UP THE SOFTWARE
49
5
9
The printer or printers
connected to the network
will be detected. Click the
printer to be configured
(the machine) and click
the "Next" button.
connected to the network
will be detected. Click the
printer to be configured
(the machine) and click
the "Next" button.
10
Enter the IP address,
subnet mask, and default
gateway.
subnet mask, and default
gateway.
The settings in the above
window are examples.
Be sure to ask your network
administrator for the correct IP
address, subnet mask, and
default gateway to be entered.
window are examples.
Be sure to ask your network
administrator for the correct IP
address, subnet mask, and
default gateway to be entered.
11
Click the "Next" button.
• The "Ethernet Address" is indicated on the left side of the machine
near the LAN port.
• If the machine is used on a different network after the IP address is
set, the machine will not be recognized. Enter the Ethernet Address
and click the "Initialize" button to initialize the IP address. Follow the
on-screen instructions to click the "OK" button and then the "Search"
button.
and click the "Initialize" button to initialize the IP address. Follow the
on-screen instructions to click the "OK" button and then the "Search"
button.
When "Get IP Address Automatically" is selected, the IP address may
at times change automatically. This will prevent printing. In this event,
select "Assign IP Address" and enter the IP address.
at times change automatically. This will prevent printing. In this event,
select "Assign IP Address" and enter the IP address.
Note
Note